Table of Contents
Advertisement
Using the iPhone/iPad apps
You can use the iPhone/iPad apps in either portrait or landscape mode.
NOTE: Remote viewing resolution is reduced by default. It is selectable in the Bandwidth tab,
however increasing the resolution will increase the amount of bandwidth required for
remote viewing and may affect performance due to bandwidth constraints.
Using Playback
NOTE: Using Playback requires you to download video from the DVR at the full high definition
recording resolution. This may require large amounts of data. If using over a 3G or mobile
network, charges may vary based on provider.
1
Touch the screen to bring up the menu, and press
2
Touch a channel to playback then touch Goto.
Channel selected
Swipe left or right
to change channel
Tap inside the display area
to bring up the menu
NOTE: Audio not supported
Touch Goto
Touch a channel
Smartphone and Tablet Apps
Disconnect
Switch split-screen
display mode
Open PTZ
controls (PTZ
camera required)
.
Goto PTZ preset
(PTZ camera
required)
Open Playback mode
123
Advertisement
Table of Contents
