Table of Contents
Advertisement
Playback
Event Playback
Event Playback plays back video of the chosen event type (Motion, Sensor, or Audio) only.
To use Event Playback:
1
From Playback mode, right-click on the screen and select Event Playback. Click the type of
event (Motion, Sensor, or Audio) you want to playback.
NOTE: Audio events not supported on 8-channel models.
• The DVR plays back footage from the selected event type only. The Playback toolbar shows
times with events of the selected type in green. Times are highlighted for all channels shown
in split-screen, or for the single channel shown in full-screen.
Event Playback Toolbar — Times with footage of the selected event type are show n in green.
2
To exit Event Playback, right-click on the screen, select Event Playback, and click All.
28
Click the type of event you
would like to playback
Advertisement
Table of Contents
