Appendix C: Recording Audio - Lorex LHD100 SERIES Instruction Manual

Appendix C: Recording Audio

The system can also record audio for up to 4 channels. You must have audio-capable
cameras (not included) or self-powered microphones (not included) in order to record
audio on the system.
4-Channel
BNC
Connect an RCA audio cable from
the camera into the corresponding
Audio IN or A port
To enable audio recording:
1 Connect the BNC video cable from the camera to one of the CAMERA INPUTS ports on the
rear panel of the DVR. For example, connect the camera to Video INPUT port 1.
2 4-channel: Connect the RCA audio cable from the camera to the corresponding Audio IN.
Following the example in step 1, you would connect the cable to Audio IN port 1.
• 8-channel: Connect the Audio/Video cable to the Audio/TV/Spot port. Connect the RCA audio
cable from the camera to the corresponding A connector on the Audio/Video Octopus cable.
3 From Live Viewing mode, right-click to open the Main Menu. Click Setup then Recording.
4 Select the Recording tab.
5 Double-click under Audio for the channel you connected in step 1 and 2 and select On to
enable audio recording.
6 Click Save to save your changes. Click Exit to return to Live Viewing mode.
RCA
8-Channel
OR
RCA
Connect the Audio/Video Octopus cable to enable
audio. Connect RCA audio cables to the corresponding
A connector
Appendix C: Recording Audio
135