Appendix D: Hard Drive Installation
5
Carefully slide the hard drive panel straight back until it is clear of the DVR SATA connector(s)
and lift it out of the DVR.
6
Turn the hard drive you want to install upside down, so that the SATA and power connectors
are facing up.
7
Turn the hard drive panel over on top of the hard drive with the long side facing the SATA
connectors (see illustration below). Insert 4 screws to secure the hard drive to the hard drive
panel.
NOTE: Screws to install a second hard drive are not provided.
138
DVR SATA connector
HDD power and
SATA connector
Short side
Hard drive screws
Long side