Table of Contents
Advertisement
To enter PTZ camera settings in the DVR:
1
Right-click to open the Main Menu. Click Setup>Camera>PTZ.
2
Under the channel that the PTZ camera is connected to, configure the following:
• Protocol: Double-click and select the protocol used by the camera.
• Camera ID: Double-click and select the camera ID.
• Baud Rate: Double-click and select the camera baud rate.
3
Click Save. Click Exit to return to Live Viewing mode.
PTZ Controls
To access PTZ controls:
1
Right-click to open the Main Menu and select PTZ Control.
Left
2
Right-click again to access advanced PTZ controls.
Up
Zoom Out
Down
Appendix B: Connecting a PTZ Camera
Select the Protocol, Camera ID, and Baud
Rate. Check the instruction manual for
your PTZ camera for details.
Zoom In
Right
131
Advertisement
Table of Contents
