Setting up your DVR for Remote Connectivity
To connect to your DVR's DDNS address on Mac:
1
Double-click the MacViewer icon (
2
Click Device (
3
Configure the following:
• Site Name: Enter a name for your DVR of your choice.
• Address: Enter the Domain Name/URL Request from the confirmation email followed by
.lorexddns.net. For example, if the Domain Name/URL Request is
tomsmith.lorexddns.net
• Port: Enter the DVR's Client Port (default: 3000).
• User ID: Enter the DVR's user name (default: admin).
• Password: Enter the DVR's password (default: left blank).
4
Click Add then click Connect. MacViewer connects to your DVR and streams live video from
your cameras.
NOTE: For more information on using the Mac client software, see "Remote Viewing Using
Client Software on Mac" on page 116.
92
). MacViewer opens.
) to open the Connection Manager.
.
tomsmith
, enter
Name your DVR anything of your choice
DVR's DDNS address (e.g.
tomsmith.lorexddns.net
)
Client Port (default: 3000)
DVR's User Name (default: admin)
DVR's Password (default: left blank)
Click Add
Then click Connect