Setup
2
Select the Duration tab.
3
Under Post Alarm, double-click the channel you want to change and select the amount of
time the DVR will record after events occur.
4
Click Save to save your changes and click Exit to return to Live Viewing mode.
To enable Pre Alarm:
1
From Live Viewing mode, right-click to open the Main Menu. Click Setup then Recording.
2
Select the Duration tab.
3
Under Pre Alarm, double-click under the channel you want to change and select On to enable
Pre Alarm.
4
Click Save to save your changes and click Exit to return to Live Viewing mode.
Enabling/Disabling Event Logs
By default, the DVR creates a log entry when events occur. You can enable or disable event
logs for each event type and each channel.
To enable/disable event logs:
1
From Live Viewing mode, right-click to open the Main Menu. Click Setup then Recording.
42
Configure Post Alarm duration
Click Save
Select On to enable Pre Alarm
Click Save