2
Write down the IP Address, Web Port, and Client Port number of the DVR.
• A local IP looks something like this:
• Write down the port number beside Web Port and Client Port.
Step 3 of 3: Connecting to the DVR on the Local Network
Follow the steps below to confirm connectivity over a local network on a PC or Mac.
To connect using the DVR's local IP address on a PC:
Follow the steps below to confirm connectivity over a local network on a PC.
To connect using the DVR's local IP address on a PC:
1
Open Internet Explorer and enter http://, the DVR's IP address, followed by colon (:) and the
Web Port into the address bar (e.g.
Example (Connecting to a local IP address using Internet Explorer)
NOTE: Make sure you do not select the 64-bit version of Internet Explorer.
Select Internet Explorer
DVR IP address
Web Port
Client Port
192.168.50.219
http://192.168.50.219:80
Colon
http://
IP Address
Web Port number
Setting up your DVR for Remote Connectivity
.
).
83