Table of Contents
Advertisement
Setup
Setup
Configure the DVR date and time, camera settings, recording parameters,
recording schedule, network settings, user accounts, and system settings.
Format hard drives and flash drives for recording and backup. Install firmware
updates and restore to factory defaults.
Time
Set DVR date and time, change the Date Display format, enable/disable Auto Reboot.
• To set the date and time, see "Setting the Date and Time" on page 19.
Changing the Date Format
1
Right-click to open the Main Menu, click Setup then Time. Select the Date & Time tab.
2
Click the Date Display Type drop-down and select the desired date format (dd/mm/yy, mm/
dd/yy, yy/mm/dd).
3
Click Save to save your changes. Click Exit to return to Live Viewing mode.
Enabling Auto Reboot
Auto Reboot automatically restarts the DVR on a daily or weekly basis. Restarting the
system every so often ensures system stability.
30
Select date display format
Click Save
Advertisement
Table of Contents
