Page 2
System Information screen on the DVR. Under LAN, find the IP address of your system 2. On your PC, click Start and select Run. In the Run window, enter cmd and click OK. The...
Page 3
DVR show . Therefore, we need to edit the IP address and Gateway information on the DVR. 4. Check that the third set of numbers of the IP address in the IP config window and your system’s System Information screen are connect to your local network (QuickTime configuration is still necessary, however).
Page 4
How do I access my system over the Internet? Once you are able to connect your system to your local network, Prior to using remote viewing, you must log in to your system and enter the DDNS information from your Lorex DDNS confirmation email.
Page 5
4. Under DDNS Select, click the drop-down menu and select http://lorexddns.net 5. In the corresponding text fields, enter your DDNS username and password. NOTE: Obtain this information from the confirmation email after registering for the free Lorex DDNS service. 6. Under DDNS Domain Name, enter only the first portion of your DDNS domain from the confirmation email.
Page 6
To log in using DDNS: 1. Using a remote PC, open Internet Explorer. 2. In the address bar, enter your DDNS URL. NOTE: Obtain your DDNS URL from your confirmation email. 3. Enter your LAN ID and password to log in to your system (by default, admin ID: 9; password 3333).
Need help?
Do you have a question about the LH314 and is the answer not in the manual?
Questions and answers