Table of Contents
Advertisement
2
Select the Log tab.
3
Double-click under Motion, Sensor, and Sound for each channel you want to change and
select On to enable logs for that event type or Off to disable logs for that event type.
NOTE: Audio events are not supported on 8-channel models.
4
Click Save to save your changes and click Exit to return to Live Viewing mode.
Schedule
The Schedule menu allows you to determine which recording schedules are used at which
times. Each schedule has different recording settings that are set in the Recording tab.
By default, Schedule1 is set to run 24/7.
Setting the Schedule
1
From Live Viewing mode, right-click to open the Main Menu. Click Setup then Schedule. The
Schedule window opens.
• The Schedule window shows when each schedule is set to run. The grid in the Schedule
window divides each day of the week into hour-long recording blocks. The schedule set to run
Double-click under the event
type to enable/disable logs for
the event type
Setup
43
Advertisement
Table of Contents
