Network Tab; Port Tab - Lorex LHD100 SERIES Instruction Manual

Remote Viewing Using Internet Explorer
3 Click Save to save changes.

Network Tab

Select Static IP or DHCP. Please note that you may need to configure your router to set a
static IP address. See your router's instruction manual for details.
To select Static IP or DHCP:
1 Under Ethernet Type, select DHCP or Static. If you select Static, configure the following:
• IP Address: Enter the desired IP address. Make sure that the IP address chosen is available
on your network.
• Subnet Mask: Enter the subnet mask.
• Default Gateway: Enter the gateway address.
• Primary DNS: Enter the primary DNS server address.
• Secondary DNS: Enter the secondary DNS server address
2 Click Save to save changes.
NOTE: You may need to restart the DVR before it receives the new IP address. Disconnect and
reconnect the power cable to restart the DVR.

Port Tab

Configure your Client Port (default: 3000) and Web Port (default: 80).
Configure the following:
1 Under Client Port, enter the desired Client Port.
2 Under Web Server Port, enter the desired Web Port.
106
Select DHCP or Static