Using Relay Controls; Display Setting - Lorex LHD100 SERIES Instruction Manual

Using Relay Controls

Relay Controls allow you to send a release signal to an external alarm device (not included)
such as a door lock controller.
To use Relay Controls:
1 In Live Viewing mode, right-click to open the Main Menu. Click Miscellaneous then Misc.
Control.
2 Select the Relay tab.
3 Check the number of the Relay you want to release.
4 Click Release to release.

Display Setting

The Display Setting menu allows you to customize the look and feel of the on-screen
display, enable a screensaver or change settings for Sequence mode.
4-Channel Display Setting Menu
• Camera Title: Click to select On to show camera titles or Off to hide camera titles. Hiding
camera titles also hides the recording icons.
• Control Bar: Click to select On to always show the control toolbar during Live Viewing and
Playback mode. Select Off to hide the control toolbar. When the control toolbar is hidden,
move the mouse to the bottom of the screen to access the control toolbar.
• Button Sound: Click to select On to enable the DVR to beep when the front panel buttons are
pressed or select Off to disable the beep when front panel buttons are pressed.
• HDMI Frequency (8-Channel Only): Select the frequency of the HDMI output that is appropriate
for your TV or monitor: 60hz (default, for North America) or 50hz (for Europe).
• Border Line: Configure borders around the camera channels.
• Draw: Click to select On to enable borders or Off to disable borders.
• Type (8-Channel Only): Select All to show borders on all sides of each channel or select
Inside to show borders on the inside borders only.
• Width: Select a 2Pixel or 4Pixel border width.
• Color: Select the border color.
8-Channel Display Setting Menu
Miscellaneous
73