Event Tab
Enable events and configure event settings.
To configure Event settings:
1
Click the channel you want to configure or click All to configure all channels. Click the
Recording Schedule you want to configure.
Click to select
cameras to configure
2
Configure the following:
• Motion: Select On to enable motion detection events or Off to disable. Click Range to configure
motion areas. Click and drag inside the grid to select motion detection areas. Areas enabled
for motion detection are in green. Click Save when finished.
• Sensor: Select On to enable sensor events or Off to disable sensor events. Sensor alarms
require sensor devices (not included) be connected to the DVR.
Remote Viewing Using Internet Explorer
Click to select
Recording Schedule
Click and drag to configure motion
detection areas (green).
Click Save
101