Appendix B: Connecting A Ptz Camera; Configuring Ptz Settings - Lorex LHD100 SERIES Instruction Manual

Appendix B: Connecting a PTZ Camera

Appendix B: Connecting a PTZ Camera
You can connect HD-SDI RS-485 PTZ cameras (not included) to the RS485 ports on the rear
panel.
HD-SDI PTZ cameras are required to use PTZ functions. Regular BNC
PTZ cameras are not compatible with the DVR.
To connect a PTZ camera to the system:
1 Connect the Transmit+ (TX+) Cable to TRX+ (OUT) on the RS485 / Alarm port on the rear
panel.
2 Connect the Transmit- (TX-) Cable to TRX- (OUT) on the RS485 / Alarm port on the rear
panel.
3 Connect the video cable to a BNC port.
BNC

Configuring PTZ Settings

Before you can use the PTZ controls, you must enter your camera's PTZ protocol details
into the DVR.
Prerequisite:
• Obtain the PTZ protocol details for your camera. Check your camera's instruction manual for
details.
130
TX+
TX-