Setting Up Your Dvr For Remote Connectivity; System Requirements - Lorex LH010 ECO BLACKBOX SERIES Instruction Manual

Setting up your DVR for Remote Connectivity

Setting up your DVR for Remote Connectivity
The system features a built-in browser-based software that allows you to access your
system remotely over your local area network (LAN) or over the Internet using Internet
®
Explorer (PC) or Safari
(see "Lorex Client 11: Client Software for PC" on page 67 for details).
For details on navigating the remote viewing interface, see
"Remote Viewing Interface" on page 68.

System Requirements

Prior to using Lorex Web Client, make sure your system meets or exceeds the following
system requirements:
Description
CPU
Pentium
Operating Windows XP/Vista/7/8
System
Mac OSX 10.6.6 and above (Intel processors only)**
Memory 256 MB RAM or greater
Video 16 MB of video memory
Network (LAN) 10/100 BaseT Network
Network (WAN) 384 Kbps upstream*
*High-speed Internet service is recommended when using DVR Netviewer.
Browser Internet Explorer 7 or later (PC) / Safari 6.0 and above** (Mac)
NOTE: If a user connects to the system remotely, there may be slow performance when
accessing the system locally. This is normal, and not a malfunction.
** For the latest compatibility list, check www.lorextechnology.com, as new software versions are released
to the market.
56
®
(Mac). There is also a client software for PC provided on the CD
Remote Viewing Client
®
4 or above
Requirement