Setting The Remote Control Address - Lorex LNR400 SERIES Instruction Manual
Hide thumbs
Also See for LNR400 SERIES:
- Instruction manual (192 pages) ,
- Quick mobile manual (2 pages) ,
- Quick connection manual (2 pages)
Table of Contents
Advertisement
8
Remote Control
8.1 Setting the Remote Control Address
If you have more than one system, you can set up your remote control to pair with a specif-
ic system.
To set the remote control address:
1. Right-click and click Main Menu. Enter the system user name (default: admin) and
password (default: 000000).
2. Click
>General>General.
3. Under Device No., enter the address number you would like to assign to the remote
control.
4. Click OK.
5. Using the remote control, press Add. Then enter the address number and press Enter.
#LX400021; r. 3.0/23574/23574; en-US
18
Advertisement
Table of Contents
