2
Use the direction and Zoom/Focus controls to move the camera into the desired position.
3
Click Set to save the preset.
Go to Preset
1
Click Preset and select a preset number. Click Save & Exit to confirm.
2
Click Go to have the camera move to that preset position.
Configuring the Camera to Go to Preset during Alarms
1
Right-click to open the Main Menu. Click Setup>Recording>Alarm.
2
Double-click under PTZ Preset for your PTZ camera, and select the Preset the camera will
Go to during alarms.
3
Click Save. Click Exit to return to Live Viewing mode.
PTZ Tours
PTZ Tours allow you to configure the camera to switch between presets every few seconds.
You can configure up to 2 tours with up to 8 presets each.
To create a PTZ tour:
1
From Live Viewing mode, right-click to enter the Main Menu. Click Setup>Camera>PTZ.
2
Double-click Duration and select the duration you would like the camera to stay on a preset
before switching to the next one.
3
Double-click Tour under the PTZ camera, click Set.
Appendix B: Connecting a PTZ Camera
Select the Preset you want the
camera to go to during alarms
133