• Storage Failure: A hard drive has failed. Replace the hard drive (see "Appendix D: Hard Drive
Installation" on page 136).
• Storage Warning: The hard drive is about to fail. Replace the hard drive (see "Appendix D:
Hard Drive Installation" on page 136). You can backup the data on the hard drive before
replacing (see "Backup" on page 62).
To configure Error Notifications:
1
From Live Viewing mode, right-click to open the Main Menu. Click Setup then System.
2
Click Error Notification Action and click the following options to enable one or more actions
that will occur when a system error occurs.
• Buzzer: The DVR buzzer is activated when system errors occur.
• Email: A notification email is sent when system errors occur. Email settings must be
configured before email notifications can be sent. For details, see "Enabling Email
Notifications" on page 52.
• Relay: Perform a Relay Out when system errors occur.
• Popup Window: Display a popup warning when system errors occur.
3
Under Error Notification Duration, select Latch (actions will be performed until a button on
the front panel is pushed) or select the duration of actions.
4
Click Save to save changes. Click Exit to return to Live Viewing mode.
Select actions
Error Notification Popup Window
Setup
59