Software Interface Sample: Mailmiser Ver 1.2 - Bryce 5K-LE Owner's Manual

Software interface sample:
Refer to the MailMiser User's Guide to setup a database for printing labels.
While using MailMiser, a label must be defined in order to print your addresses on the BOS 5K-
LE.
Select System/Printer Functions (9) from the Main Menu.
The System/Printer Function Menu will be displayed.
Select Printer Selection (3).
The Print Selection Menu will be displayed.
Select BRYCE BOS 12K.
You will be returned to the System/Printer Functions Menu.
Enter data according to the following table.
1. Function "Typing" Keys
2. Rebuild Indexes
3. Printer Selection
4. Reset Printer
5. Special Printer Codes
6. Default Directory
7. Color/Monochrome
8. Delivery Point Barcode
9. Printer passes for Barcode
0. Exit to Main Menu
Select Exit to Main Menu (0), after you have entered the above data.
The MailMiser Main Menu will be displayed.
Select Label/Envelope Sizes (8).
Select Choose from standard label sizes (1).
Select Direct Image Printer, 1 up, 0 margin.
MailMiser will ask you if you want to Print a Test Pattern, select NO at this time, this will return
you back to the Main Menu.
Select Label/Envelope Sizes (8).
Select Edit current label size (2).
Enter data according to the following table.
Label Description
Label Width
Left Margin
Inches from top of 1 label to top
of next label
Number of Labels across
Number of Spaces Between Labels
Lines Per Inch
Characters Per Inch
Select Print Labels from the Main Menu to print addresses.
NOTE: Select NO when the program asks you if you want to print Postnet Barcode.
Revision A
Appendix F Printing with Software
MailMiser ver 1.2
Bryce BOS 12K
Yes
enter monitor type
NO
1
Direct Image Printer, 1 up, 0 margin
4.5
0
1.167 (for a 7 line address)
approx. .167 per line, at 6 lpi
1
0
6 lpi (default)
10 cpi (default)
5K-LE OWNERS MANUAL
P/N 90-00852-001
Section F - 22