Installing The Sliding Fence - Bryce 5K-LE Owner's Manual

2. Raise the Wire Form to a vertical position.
3. Press Wire Form underneath the two tabs.
Front Support Plate is not shown for ease of illustration.
4. Rotate top of Wire Form down and insert the curved
supporting bar through the slot in the Feed Carriage
Assembly. Slight force on the Support Bar may be
needed to fit it into the slot.
5. Turn the Carriage Knob on the Feed Carriage
Assembly to hold the Wire Form Assembly in place.
Included in the Accessory Kit is a long and short Sliding
Fence. The fences keep the media together in a stack. Use the
short Sliding Fence for postcards up to media the size of #10
envelopes. Use the Long Sliding Fence for all other sizes.
Revision A 5K-LE OWNERS MANUAL
P/N 90-00852-001
Setting up the Printer
Installing the
Sliding Fence
Section 3 - 3