Software Interface Sample: File Express Ver. 5.1 - Bryce 5K-LE Owner's Manual

Software interface sample:
When using FILE EXPRESS, A label must be defined in order to print your addresses on the
BOS 5K-LE.
Select Label Printing (6) from the Main Menu.
Select Design a New Label from Label Menu.
Enter Data into the Label Spacing Screen according to the following table:
1 How many labels across the page (1-5)
2 Spaces across from label to label (10-500)
3 Lines down from label to label (1-999)
4 Printable lines on each label (1-250)
5 Characters per line on each label (10-999)
6 Tab position to first label (1-99)
When you have completed entering this data, press F10 to accept these changes.
A Test Printer Screen will be displayed, if you would like to test this setup press Y, if not press
N.
File Express will display a label box on the screen the size that was specified on the Label
Spacing Screen.
Type ALT-F to pop up field window.
Move highlight bar to the field you would like on the first line of your label.
Press Enter twice, to accept it as a field only.
Repeat the above sequence to place your fields in the appropriate locations.
When you are finished designing your label, press F10.
The Record Selection Screen will be displayed. Press Enter.
The Label Sub Menu will be displayed.
Select S (to select save option).
Press Enter (to confirm you want to save).
Type in a name for your label.
Press Enter.
Type a description for you label.
Press Enter (to save your label layout)
While you are in the Label Sub Menu, now would be a good time to specify a printer.
Press 7 to update printer options.
Press Enter
Press ALT-S to select a printer definition file.
Select POSTSCRIPT - Generic., and press Enter.
Revision A
Appendix F Printing with Software
FILE EXPRESS ver. 5.1
CONTINUED ON NEXT PAGE
5K-LE OWNERS MANUAL
P/N 90-00852-001
1
n/a
7
7
45
1
Section F - 12