Media Types - Bryce 5K-LE Owner's Manual

The printer is designed to feed and print on a variety of media
with various finishes and coatings. The sharpness of the print
quality will vary with different media types, depending on
how absorbent the media is, as well as other qualities. The
best results can be achieved using white wove bonded stock.
The printing quality will be less sharp on tyvek, recycled and
glossy media.
The types of media the printer is able to use is:
• Envelopes: should be stacked to feed with the
bottom edge first (non flap edge).
• Booklets: should be stacked with the sealed edge
leading or stacked with the sealed edge placed
parallel to the rear wall of the Rear Support Plate
Assembly.
• Catalogs: should be stacked with the sealed edge
leading or stacked with the sealed edge placed
parallel to the rear wall of the Rear Support Plate
Assembly.
• Postcards: must be 3.5" x 5" or larger.
• Self Mailers: may be folded in half or "C" or "Z".
The media must be tabbed and not exceed the
maximum allowable thickness.
• Paper: may consist of 16 to 80lb of uncoated to
coated stock. The maximum width and height is
specified in Appendix G.
All folded material and catalogs must be tabbed as per postal
regulations.
The paper types that can be used are:
• White wove
• Bond Paper
• Recycled Paper
• Coated Paper
• Card Stock
• Brown Kraft
• Manila
Revision A 5K-LE OWNERS MANUAL
P/N 90-00852-001
Trying Out the Printer

Media Types

Section 4 - 5