Setup Menu; Heavy Media Mode; Test Print Head - Bryce 5K-LE Owner's Manual

SETUP MENU

The Industrial Printer has a Setup Menu that lets you configure the Industrial Printer so it will function
correctly with the computer and computer software. Use the Setup Menu to also display the menus in
another language besides English. Hold down the [Menu] button for two (2) seconds until SETUP
MENU is displayed on the first line of the LCD. Select the desired menu option when it appears on the
second line of the LCD.

1. HEAVY MEDIA MODE

Enable this option for the printer when the media stack exceeds 10 pounds (4.54 kg).
Menu Items

2. TEST PRINT HEAD

Before using this option, verify the media is loaded in the input bin so a test pattern can be printed. A
diagonal line will print across the media with a small solid box. If a gap is present within the diagonal
line, one or more nozzles of the ink jet cartridge maybe blocked and need to be cleaned. Clean the ink jet
cartridge by performing a purge (see menu option below). If the purge does not clear the nozzles, then
remove the Ink Jet Cartridge. See chapter 3 on how to remove and install an ink jet cartridge. Clean the
nozzles with a dry soft cotton cloth or one moistened with water.
Menu Items
Revision A
Selections
On or Off
Selections
Print a test
pattern
? Yes or
No
5K-LE OWNERS MANUAL
P/N 90-00852-001
Explanation
Use this option to increase the force used to feed the
media. Note: Whenever the transport motor torque
is increased the media throughput will decrease
approximately 10%.
Explanation
+
Press the (YES) button to print the test pattern or
press the - (NO) button to disable this option.
Printer Menu System
Section 6 - 9