Table of Contents
Advertisement
Software interface sample:
Before running RAPID FILE, a printer driver must be loaded. This is done by running RAPID
FILE's Printer program from DOS as explained in the RAPID FILE manual.
The printer file to select is called GENERIC, and must be set up as one of the printer devices
with appropriate I/O port settings.
From within RAPID FILE when printing addresses:
1.
Select FILE from the main menu
2.
Select RETRIEVE FILE or CREATE ( If you choose to create, enter data)
3.
Select LAYOUT
4.
Select LAYOUT TYPE
5.
Select LABEL
6.
When asked if you want to design a label - Select YES
A LABEL WILL BE DISPLAYED IN THE CENTER OF THE SCREEN
7.
Press F10
Select SHOW FIELD, Fields will be displayed on the right side of the screen.
Select FIELD
Use arrows to set field width.
Use arrows to drag field into position.
REPEAT Step 7 until all fields are placed
8.
Press F9 to Implement
9.
Select PRINT from main menu
10.
Select DESTINATION
11.
Select BEGIN PRINTING
Revision A
Appendix F Printing with Software
RAPIDFILE
5K-LE OWNERS MANUAL
P/N 90-00852-001
Section F - 29
Advertisement
Chapters
Table of Contents
Troubleshooting
