Test Paper Sensor; Test Shuttle Motor - Bryce 5K-LE Owner's Manual

Enter the menu option to move the setting down. Enter the new value into the printers memory. An
Asterisk (*) will appear in front of the new selection. Press the [Test Env.] button to print another Test
Pattern. The Test Pattern is printed using the entered
selection.
When the correct numeral is selected the center Test
Pattern will have ten long vertical lines like the example
to the right.

2. TEST PAPER SENSOR

Use this option to check the operation of the photo sensor
Selections
Press the [Enter] button to select
this option. As soon as, the
[Enter] button is pressed, the
printer will be in the test mode.
3. TEST SHUTTLE MOT. (MOTOR)
Use the test shuttle motor option to help determine if the motor or Print Head Holder is not functioning
properly i.e. slams on the opposite side, moves inconsistently, etc.
Selections
Press the [+] Plus button to move
the print head holder to the right.
Press the [-] Minus button to
move the print head holder to the
left. Press the [Test Env.] button
to start the Continuous Shuttle
Motor Test. Press the [Menu]
button to stop the test.
Revision A
When correct pattern is selected
all lines should be straight
0 1 2 3 4 5 6 7 8 9
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
.
The state of the sensor is represented on the LCD by the message
Sensor Blocked or Sensor Unblocked. The display will read
Sensor Unblocked when the sensor path between both sensors is
clear. When the sensor has media in the path, or the sensor is
covered with paper dust, or the sensor is defective the display will
read Sensor Blocked.
If the message Sensor Blocked remains after cleaning, call your
Service Representative for repairs. Note: For further information
see the Cleaning And Maintaining Section.
The Test Shuttle Motor is used to check the left and right movement
of the print head holder assembly. Use the continuous test to check
for a repetitive left and right movement of the print head holder
assembly along the length of the shaft.
5K-LE OWNERS MANUAL
P/N 90-00852-001
Printer Menu System
Explanation
Explanation
Section 6 - 15