Main Menu; Address Layout - Bryce 5K-LE Owner's Manual

Main Menu

Use this menu to choose the format and style of address printed and for information to assist in
production. Selected menu options from a sub-menu will appear first in the list of options.
Note: The printer driver overrides most control panel settings in the printer. Some of the control
panel settings are also configured in the printer driver.

1. ADDRESS LAYOUT

Use this option to change the page layout for your mail piece.
Menu Items
A. Distance To Right
B. Distance To Bottom 0.00 to 15.00
C. Line Spacing
D. Orientation
E. Orientation Cntrl.
(Control)
Revision A
Selections
0.00 to 9.40
Automatic
3 lines / inch
4 lines / inch
6 lines / inch
8 lines / inch
Normal
or
Invert
Automatic
or
Manual
5K-LE OWNERS MANUAL
P/N 90-00852-001
Explanation
This menu item allows you to change the position of
the record on the media by moving the record away
from the right edge of the media. Distance to Right
is the distance measured from the Right edge of the
media to the first printable character.
This menu item allows you to change the position of
the record. The Distance To Bottom is the distance
between the bottom edge of the media and the base
of the first line of the address. Note: A Lower Right
Barcode will not print unless a bottom margin of 5/8
(1.58 cm) inches is retained.
This sets the distance between lines of text. It is
measured as the number of lines per inch of text.
Note: Whenever changing the point size of the font,
use the automatic line spacing option. The printer
will automatically select the correct setting for the
increased or decreased font size of the characters
being printed.
This item changes the direction that the print
appears on the media.
Normal prints upright when viewed from the front
of the Head Print Assemblies. The Lower Right
Barcode will only print in Normal orientation.
Invert reverses the print 180 degrees. Setting the
printer to Invert does change some of the menu
items.
This option allows the printer to ignore the
orientation commands sent by the computer.
Automatic When the Orientation Control is set to
Automatic the printer acknowledges the orientation
commands sent from the computer.
Printer Menu System
Section 6 - 3