Print Quality; Font - Bryce 5K-LE Owner's Manual

2. PRINT QUALITY

This option changes the speed of the printer and the density of the characters printed on the media. These
menu items are available in the printer driver and override the control panel settings.
Menu Items
Executive
Letter
Draft

3. FONT

Use this option to alter the fonts characteristics: typeface, point size, spacing, stroke weight, and style.
The printer driver downloads Windows True Type fonts and overrides internal fonts selected through the
control panel.
Menu Items
A. Name
Note: When A. NAME
is shown on the
display as a Menu
option, press the [Test
Env.] button and a
complete listing of the
available fonts will be
printed out in their
typeface.
B. Size
C. Width
Revision A
This is the darkest of the four print qualities, the slowest print speed and uses
the most ink.
Letter quality is used for documents that require a finished, polished
appearance. Use the following steps to change the quality of print to dark gray.
Draft quality prints documents the fastest and saves ink. This option offers the
highest print speed and prints the lightest of the three print qualities. Use the
following steps to change the quality of print to light gray.
Selections
Courier
San Serif
Roman
OCR A
OCR B
Names of fonts that
are recognized from
the PCMCIA Card slot
will be added to the
end of the list of
selections.
4 to 30
Condensed(50%)
Thin (75%)
Normal (100%)
5K-LE OWNERS MANUAL
P/N 90-00852-001
Explanation
Explanation
Select the style of font to print the records with.
Many optional fonts are available by installing an
optional font card. The Font card must be installed
(Font label facing the front of the printer). Turn the
printer power off for 10 seconds or more. Insert the
font card, then power on the printer to use the
external font card.
Note: Press the [Test Env.] button when a font
name is displayed on the LCD. A list of the
character set is printed in the fonts typeface. Use
these same steps to print a character set from a font
card.
This item changes the size of the internal font.
This item to changes the width of spaces between
characters and the width of characters. Normal
(100%) print width is the standard width of
Printer Menu System
Section 6 - 5