Bryce 5K-LE Owner's Manual page 124

cpi
See characters per inch.
data communications
The sending of data from the computer to a peripheral device i.e. the printer.
dots per inch
The number of ink dots printed in one horizontal inch. The larger the number the better the
resolution of print.
double feeding
Two or more pieces of media feed at the same time or without separation.
Dpi
See dots per inch.
draft quality
Print resolution using 150 dpi which saves ink and allows faster printing of a document.
Drivers
A file used by the computers software to communicate commands and information that the
printer needs to layout and print a document.
embedded printer commands
Commands sent in a record or document to instruct the printer to change printing options.
EPROM
Electronic Programmable Read Only Memory
escape character
A special non-printable character (ESC /
options.
escape sequence
Commands sent beginning with the escape character that instruct the printer to change
printing options: fonts, page orientation, etc.
feed gap
Opening between the ends of the H-Block Assembly and the Feed Rollers so the media is fed
one at a time.
Revision A
) used to instruct the printer to change printing
5K-LE OWNERS MANUAL
P/N 90-00852-001
Appendix I Glossary
Section I -
2