Software Interface Sample: Dataperfect Ver 2.2 - Bryce 5K-LE Owner's Manual

Software interface sample:
Refer to the DataPerfect Reference Manual to setup a database for printing labels.
While using DataPerfect, a label must be defined in order to print your addresses on the BOS
5K-LE.
Be sure the cursor is in the panel from which you want to run the report.
Press Report/Export (Shift-F7) to access the report list.
With the cursor on Built-In Short Reports, press Insert to create a new report.
Select Edit Report Name (9), then enter the desired report name (for example, BOS 5K-LE
Label). If you want to send report to the BOS 5K-LE, select Printer On/Off (1), then type in
the appropriate port number.
Select Print Margins (7), then enter the following data:
Top
Bottom
Left
Text Lines
Select Edit Report Form (8).
Move the cursor to the Report Body section of the report form, then press Report Options
(Ctrl-F7).
Select Labels (5).
Enter 1 as the number of labels across the page.
Enter 45 as the width in characters of each label.
Enter 7 as the number of lines per label.
The code for the label specifications is displayed in the Report Body section.
Use Select (F4) to select the fields needed for the labels. Be sure that the alphanumeric fields are
edited to include the ;;T print mode indicator. (See Field Format, Print Mode Indicators in your
Reference Manual).
Press Exit (F7) or Save (F10) to save the report form when you have completed selecting fields.
You will return to the Report Menu.
Set the ADDRESS SETUP in the BOS 5K-LE SETUP MENU to 7 lines.
You are now ready to print addresses on your BOS 5K-LE.
Press Report/Export (Shift-F7) to run the report.
Revision A
Appendix F Printing with Software
DATAPERFECT ver 2.2
0
0
0
7
5K-LE OWNERS MANUAL
P/N 90-00852-001
Section F - 10