Bryce 5K-LE Owner's Manual page 102

Appendix F Printing with Software
When the template is created, you must choose a form.
Select Choose Form from the Print Menu.
Select New from the Choose Form for Printing Menu.
Enter the parameters into the Edit Form window as shown below.
The next step is to select a printer.
Select Choose Printer from the Print Menu.
Select Bryce 10K on LPT1 (LPT1 is used as an example, the actual printer port that you have
the Bryce 10K assigned to in Windows will be displayed here.)
Click on OK
Set the ADDRESS SETUP, located in the Bryce printers Setup Menu, to 8 lines.
You are now ready to print.
Select Print Labels from the Print Menu.
Revision A 5K-LE OWNERS MANUAL Section F - 26
P/N 90-00852-001