Trying Out The Printer; Power On; Installing A Ink Jet Cartridge - Bryce 5K-LE Owner's Manual

The power cord is plugged in, the printer is connected to the
computer. Now you can turn the power on.
•
Press on the printers' ON/OFF power switch.
The switch is located on the rear of the printer
next to the line cord receptacle. Press on the
symbol "I" (ON) position. The printer LCD
menu will display PRINTER INITIALIZING
and then automatically go ON LINE.
The Address Printer uses an Ink Jet Cartridge for printing.
You must install the Ink Jet Cartridge before you use the
machine. To install the cartridge do the following:
•
Verify the LCD display message on the top line of the
display is either OFF LINE or ON LINE.
•
Open the front cover.
•
On the top Control Panel, depress the Cartridge button
([+] plus button) and the carriage will travel to the
center position and stop. DO NOT MOVE THE
CARRIAGE BY HAND!! Damage may occur to the
carriage.
Revision A 5K-LE OWNERS MANUAL
P/N 90-00852-001

Trying Out the Printer

Power On

Installing an Ink
Jet Cartridge
Section 4 - 1