Introduction; Operation; Accessing Advanced Features; Section 3. Introduction - Xantrex XKW 8-350 Operating Manual

Section 3. Operation

Introduction

All power supplies in this series offer the following features as part of their standard
configuration.
Feature
Remote Programming of Output Voltage and Current Limit with 0-5V,
0-10V, 0-1mA, and 0-5k ohms
Overvoltage Protection (OVP) with front panel controls or 0-5V and
0-10V programming
Programmable Shutdown with AC, DC, or TTL compatible signals and
contact closure
Remote Monitoring of Status Indicators for thermal shutdown, OVP
status, remote/local programming mode, and voltage/current mode

operation

Calibrated Readback Signals for output voltage and output current with
selectable 0-5V or 0-10V scales
Multiple Supply Configurations such as series, parallel, and split
supplies
Accessing
Accessing these features may require that you use one or more of the following
Advanced procedures:
Features
•
•
•
•
•
"Configuring for Remote Programming, Sensing, and Monitoring" on page 48
provides a reference to the function and location of these controls, and procedures
for making any required changes.
Revision A
Using the front panel REM/LOC (Remote/Local Programming) switch.
Reconfiguring the rear panel J3 connector.
Making connections to the J3 connector.
Resetting internal jumpers JMP1 and JMP2.
Resetting internal switch SW1.
Reference
page 54
page 62
page 65
page 72
page 72
page 73
47