Features and Specifications
Rear Panel Connectors and Switch
Rear Panel Connectors and Switch
The input AC power, output DC power, as well as the remote program sense and
monitor connector are located on the rear panel. The program and monitor function
selector switch (SW1) is located internally on the main PCB. See
20
connections and settings.
DC Output Busbars
Ventilation Outlets
Figure 1.2 Power Supply Rear Panel
20
for locations. Refer to
J3 Program, Sense and
Section 2, "Installation"
Monitor Connector
Operating Manual for XKW 3kW Series Power Supply
Figure 1.2, on page
for detail on procedures for
AC Input
Terminal Block
Allow Adequate Clearance on
Sides for Ventilation