Using The Scanner Buttons; Using The Startup Button - Fujitsu 6000NS - fi - Document Scanner Operator's Manual

2.1

Using the Scanner Buttons

2.1.1 Using the Startup Button

When the scanner is off or in standby mode, pressing the startup button will start the scanner up
and display the "Login" screen.
Shutdown
* Other than pressing the startup button, any of the following operations will open the "Login"
screen:
• Loading the document in the ADF paper chute.
• Closing the top cover.
• Pressing a keyboard key.
The idle time before standby mode entered can be changed. For details, refer to
Time to Standby Mode" (page
ATTENTION
22
LED Dark
Press Button
57).
When the scanner is starting up or in standby mode, be careful to never
hold the startup button down for four seconds, as this will cause the scanner
to shutdown. If this happens, saved scanned data may become unusable.
If the startup button is accidentally held down too long, causing the scanner
to shutdown, temporally detach the AC adaptor to ensure that the power is
completely off.
After turning the power off, wait for at least ten seconds before turning the
power back on again. To shutdown the scanner correctly, press the [Shut-
down] button on the "Login" screen.
Operating
LED Lit
Login Screen
Login
Operation Screens
No operation
for set period
Standby
LED Blinking
Press Button(*)
"3.5.5 Setting the