Setting Up The Authenticator - HP ProCurve NAC 800 User Manual

802.1X Quarantine Method
Setting up the 802.1X Components
11-48
5. Select the Authentication tab.
Figure 11-38. Windows Vista Local Area Connection Properties, Authentication Tab
6. Select the Enable IEE 802.1X authentication check box.
Select an EAP type from the Choose a network authentication method drop-
7.
down list. For this example, select
Protected EAP (PEAP).
Important: This EAP type must match the EAP type selected in step 7, step
q on page 11-17.
Clear or select the Cache user information for subsequent connections to this
8.
network check box. The choice is yours.
9. Click OK.
10. Select to reboot if prompted.

Setting up the Authenticator

This section provides sample configurations for the following switches:
■ "Cisco® 2950 IOS" on page 11-49
"Cisco® 4006 CatOS" on page 11-50
■
■ "Enterasys® Matrix 1H582-25" on page 11-50