Deleting Enforcement Clusters - HP ProCurve NAC 800 User Manual

NOTE:
The statistics shown in this window are per cluster, where the statistics shown
in the Home window are system-wide. See "System Monitor" on page 1-6 for
column descriptions.

Deleting Enforcement Clusters

Enforcement clusters need to be empty before the delete option appears next
to the name in the NAC 800 user interface.
To delete Enforcement clusters:
Home window>>System configuration>>Enforcement clusters & servers
Click delete next to the cluster you want to remove. The Delete Enforcement
1.
cluster confirmation window appears.
Click yes. The System configuration window appears (figure 3-1).
2.
System Configuration
Enforcement Clusters
3-11