HP ProCurve NAC 800 User Manual page 352

802.1X Quarantine Method
Setting up the 802.1X Components
#
# FreeRADIUS Connector configuration file
#
#
# TO DO - Change localhost to your server's IP if this is not the built-in
FreeRADIUS server
#
ServerUrl=https://localhost/servlet/AccessControlServlet
DebugLevel=4
Debug=on
Username=nacuser
Password=nacpwd
#
# TO DO - Modify the vlan ids and names to match your switch configuration
#
#
# Use these attributes for all non-Extreme switches
#
#
# Uncomment these two sections if you want the connector to specify the
normal user vlan
# rather than specifying it for each user in the users configuration file.
#
#"HealthyRadiusAttributes"
# Tunnel-Medium-Type := 6,
# Tunnel-Private-Group-ID := 50,
# Tunnel-Type := VLAN,
#
#"CheckupRadiusAttributes"
# Tunnel-Medium-Type := 6,
# Tunnel-Private-Group-ID := 50,
# Tunnel-Type := VLAN,
11-34
3. Configure the SAFreeRADIUSConnector.conf file with the
appropriate RADIUS attributes and VLANS. See comments in the
following sample file for instructions.