Always Quarantine Endpoints And Domains; Notifications - HP ProCurve NAC 800 User Manual

NOTE:
CAUTION:
TIP:
CAUTION:
TIP:
You can use a MAC prefix (one to five bytes or octets) to act on more than
one endpoint at a time. For example entering 00:13 matches all MAC
addresses that begin with 00:13.
To exempt end-user domains from testing, in the Whitelist area, enter the
2.
domain names.
3. Click ok.
If you enter the same endpoint in both the Whitelist and the Blacklist areas
in the Exceptions window, the Whitelist option is used.

Always Quarantine Endpoints and Domains

To always quarantine endpoints and domains:
Home window>>System configuration>>Exceptions
1. To always quarantine endpoints when testing, in the Blacklist area, enter
the endpoints by MAC or IP address, or NetBIOS name.
To always quarantine domains when testing, in the Blacklist area, enter
2.
the domains.
In DHCP mode, the NAC 800 firewall quarantines based on MAC address
(everything entered must be translated to the corresponding endpoint's MAC
address). This translation occurs each time activity from the endpoint is
detected. To reduce translation time, use the MAC address initially.
If you enter the same endpoint in both the Whitelist and the Blacklist areas
in the Exceptions window, the Whitelist option is used.
In the System configuration>>Exceptions window, in the Whitelist and Black-
list areas, you cannot specify a MAC address OUI wildcard.

Notifications

The Notifications menu option allows you to configure email notifications sent
to announce test alerts and system errors. You can configure the following:
■ Send email notifications
Elect not to send notifications
■
System Configuration
Cluster Setting Defaults
3-117