Windows Vista Setup - HP ProCurve NAC 800 User Manual

NOTE:
d. Select the Authentication tab.
Figure 11-35. Windows 2000 Local Area Connection Properties, Authentication Tab
Select the Enable network access control using IEE 802.1X check box.
e.
f. Select an EAP type from the drop-down list. For this example, select
MD5-Challenge.
IMPORTANT: This EAP type must match the EAP type selected in
"Setting up the RADIUS Server", step 7, step q on page 11-17.
Clear or select the Authenticate as computer when computer information
g.
is available check box. The choice is yours.
h. Click OK.
3. Select to reboot if necessary.

Windows Vista Setup

Frequently when performing actions on Windows Vista, the User Account
Control window pops up and asks you to select Continue to authorize the
action. The instructions in this section do not include this step.
To enable a Windows Vista endpoint for 802.1X:
Windows desktop>>Start>>Control Panel>>Administrative Tools>>Services
802.1X Quarantine Method
Setting up the 802.1X Components
11-45