HP ProCurve NAC 800 User Manual page 355

NOTE:
#
# NAC 800 FreeRADIUS Connector configuration file
#
#
# General configuration parameters
#
ServerUrl=https://<SERVER IP>:89/servlet/AccessControlServlet
ServerUrl.1=https://<SERVER IP.1>:89/servlet/AccessControlServlet
ServerUrl.2=https://<SERVER IP.2>:89/servlet/AccessControlServlet
ServerUrl.3=https://<SERVER IP.3>:89/servlet/AccessControlServlet
ServerUrl.4=https://<SERVER IP.4>:89/servlet/AccessControlServlet
ServerUrl.5=https://<SERVER IP.5>:89/servlet/AccessControlServlet
DebugLevel=4
Debug=on
Username=nac
Password=changeme
#
# TO DO - Modify the vlan ids and names to match your switch configuration
#
#
# Use these attributes for all non-Extreme switches
#
#
# Uncomment these two sections if you want the connector to specify the
normal user vlan
# rather than specifying it for each user in the users configuration file.
#
#"HealthyRadiusAttributes"
# Tunnel-Medium-Type := 6,
# Tunnel-Private-Group-ID := 50,
# Tunnel-Type := VLAN,
When using the Cisco® Catalyst® 6509 with the Catalyst operating system
(CatOS), you need to refer to the VLAN by name, and not by number as shown
in the following sample file. For example, use "Tunnel-Private-Group-ID :=
User_Seg_PA," instead of "Tunnel-Private-Group-ID := 50,".
802.1X Quarantine Method
Setting up the 802.1X Components
11-37