HP ProCurve NAC 800 User Manual page 293

NOTE:
For all other deployment modes, the Fully Qualified Domain Name (FQDN)
of the target servers should be added to the list (for example mycom-
pany.com). If the specified servers are not behind an ES, a network firewall
must be used to control access to only the desired ports.
1. For inline enforcement mode, in the Accessible services and endpoints
area, enter an endpoint followed by a colon (:), followed by a port number
as shown as follows:
10.0.16.100:53
Separate multiple endpoint entries with a carriage return (new line):
10.0.16.100:53
10.0.16.100:80
10.0.16.100:81
10.0.16.100:82
2. Click ok.
Enter a range of ports as follows:
10.0.16.100:53:65
Using Ports in Accessible Services and Endpoints
Quarantined Networks
7-5