HP ProCurve NAC 800 User Manual page 191

Connecting – NAC 800 shows this status briefly after the endpoint has
■
been tested while the endpoint is being assigned a non-quarantined
IP address.
■ Awaiting credentials – NAC 800 shows this status briefly while the
agentless credentials are being verified.
Bad credentials – NAC 800 shows this status when the agentless
■
credentials could not be verified. The end-user is presented with a
window stating why the credentials may have failed, and is given the
opportunity to re-enter the credentials, cancel the test, or try the next
test method (specified on the End-user access window).
■ Testing (agentless test) – NAC 800 shows this status briefly while the
agentless test is being performed.
Passed – NAC 800 shows this status after the endpoint has passed the
■
test and is connected to the network.
■ Failed – NAC 800 shows this status after the endpoint has failed
testing.
Could not be tested – NAC 800 shows this status after the endpoint
■
could not be tested.
■ License limit exceeded – NAC 800 shows this status when the number
of endpoints allowed on your license has been exceeded. The
endpoint is not tested or allowed access.
License expired – NAC 800 shows this status when your license has
■
expired. No endpoints are tested or allowed access to the network.
■ Test canceled – NAC 800 shows this status when the end-user cancels
the test.
Endpoint always granted access – NAC 800 shows this status when
■
an endpoint has been listed in the System configuration>>Exceptions
window to always grant access (Whitelist). These endpoints are never
tested and always allowed access.
■ Endpoint always quarantined – NAC 800 shows this status when an
endpoint has been listed in the System configuration>>Exceptions
window to always quarantine. These endpoints are never tested and
always quarantined. (Blacklist)
Awaiting test initiation – NAC 800 shows this status when one of the
■
following conditions occurs:
• NAC 800 does not have credentials and there is no agent
• NAC 800 does not have credentials and the endpoint is firewalled
• NAC 800 is waiting for credentials or an agent
• No testing has taken place yet
Endpoint Activity
Endpoint Test Status
4-11