HP ProCurve NAC 800 User Manual page 559

Port Parties
514 (TCP) Infoblox
connector to
syslog service on
the ESs
61616 (TCP) MS to post-
connect server
Ports used for NTP:
123 (UDP) MS to NTP server Destination port 123 for NTP.
123 (UDP) ES to MS
Ports used for proxy servers:
Varies MS to proxy server The port used for connecting to the
Ports used for LDAP:
Varies ES to LDAP server When using 802.1X mode with local
Table E-1. Ports in NAC 800 (cont.)
Description
In environments with the Infoblox
syslog connector, the Infoblox server
sends DHCP information to NAC 800
using syslog.
JMS API port used by external systems
to the MS such as post-connect.
NTP communication between the ES
and MS occurs on destination port 123.
proxy server.
RADIUS, connecting to Active
Directory, the LDAP server IP address
and optional port number.
Ports used in NAC 800
Comments
Configurable by making changes to
both of the following:
• Infoblox server
• syslog-ng.conf file on the MS
Not configurable
Not configurable
Not configurable
Configure in the NAC 800 user
interface:
System configuration
>>Management server option
>>Proxy server area
>>Proxy server port text field
Example: 8080
Configure in the NAC 800 user
interface:
System configuration
>>Quarantining
>>802.1X Quarantine method
>>Local RADIUS server type
>>OpenLDAP End-user
authentication method
>>Server text field
Example:
10.0.1.2:636
E-3