HP ProCurve NAC 800 User Manual page 336

802.1X Quarantine Method
Setting up the 802.1X Components
NOTE:
11-18
These steps assume there is a Domain Certificate Authority (CA) available
to request a certificate. If there is not a CA available, the certificate needs
to be imported manually.
To import the certificate manually:
1. Right-click on the Personal folder>>select All Tasks>>Import.
2. When the wizard opens, click Next.
3.Enter the path to the NAC 800 certificate, for example:
D:\support\ias\compliance.keystore.cer
4.Click Next, Next, and Finish.
9. To request a certificate from a Domain Certificate Authority:
Figure 11-17. Error Message
Open the Microsoft management console by choosing Start>>Run and
a.
entering mmc.
b. Choose File>>Add/Remove Snap-in.
c. Click Add.
d. Choose the certificates snap-in and click Add.
Select Computer account and click Next.
e.
f. Select Local Computer and click Finish.
Click Close and OK to exit out of the properties.
g.