HP ProCurve NAC 800 User Manual page 162

System Configuration
Cluster Setting Defaults
Figure 3-51. System Configuration, Accessible Services
3-114
1. Enter one or more Web sites, host names, IP addresses, ports, endpoints,
or networks, that are accessible to connecting endpoints when they fail
their compliance tests. You can enter these endpoints and services in the
following formats separated by a carriage return. Enter a range of IPs
using CIDR addresses. You might also need to specify the DHCP server IP
address in this field. If the Domains connection method is enabled (System
Configuration>>Quarantining>>802.1X>>Windows domain End-user
authentication method), you must specify your Windows domain controller.
Examples:
Web sites – www.mycompany.com
Host names – bagle.com
IP addresses – 10.0.16.100
Ports – 10.0.16.100:53
Networks – 10.0.16.1/24
Range of IP addresses – 10.0.16.1/30