Setting Terminal Parameters - HP A-F1000-E Installation Manual

Figure 19 Connect the console cable
CAUTION:
When you connect a PC to a powered-on firewall, connect the DB-9 connector of the console cable to
•
the PC before connecting the RJ-45 connector to the firewall.
When you disconnect a PC from a powered-on firewall, disconnect the DB-9 connector of the console
•
cable from the PC after disconnecting the RJ-45 connector from the firewall.

Setting terminal parameters

Follow these steps to set terminal parameters on a terminal, for example, Windows XP HyperTerminal:
Select Start > All Programs > Accessories > Communications > HyperTerminal to enter the
Step1
HyperTerminal window. The Connection Description dialog box appears, as shown in
20
Figure 20.