Configuring Openldap Settings - HP ProCurve NAC 800 User Manual

NOTE:
2. Enter the Fully Qualified Domain Name (FQDN) of the domain to be
joined in the Domain name text field.
3. Enter the user name of an account with sufficient administrative rights to
join an ES to the domain in the Administrator user name text field.
Enter the password of the account entered into the Administrator user name
4.
field in the Administrator password text field.
5. Enter the list of domain controllers, separated by commas, for this domain
in the Domain controllers text field.
6. To test the Windows domain settings:
a. Select one of the following from the Server to test from drop-down list
in the Test Windows domain settings area:
– The ES in this cluster to test from, or
– The MS
If you have a single-server installation, the Server to test from drop-down list
is not available.
b. To verify a specific set of user credentials in addition to the Windows
domain settings, select the Verify credentials for an end-user check box,
and specify the following:
i. Enter the user name of the end-user in the User name text box.
ii. Enter the password of the end-user in the Password text box.
iii. Re-enter the password of the end-user in the Re-enter password
text box.
Click test settings.
c.
7. Click ok.

Configuring OpenLDAP Settings

To configure OpenLDAP settings:
Home window>>System configuration>>Quarantining>>802.1X Quarantine
method radio button>>Local radio button
System Configuration
Quarantining, 802.1X
3-57