Starting The Windows Service - HP ProCurve NAC 800 User Manual

Hide thumbs Also See for ProCurve NAC 800:

Table of Contents

Remote Device Activity Capture

Creating a DAC Host

wrapper.app.parameter.X

Where X is the numerical value representing the order in which the

parameter will be added to the command.

b. Add additional ESs:

Locate the line that represents the initial ES, for example

wrapper.app.parameter.8=172.17.100.100

ii. Add another line just below the initial ES with the new IP address

or addresses:

wrapper.app.parameter.9=172.17.100.150

wrapper.app.parameter.10=172.50.50.7

iii. Increment the rest of the wrapper.app.parameter numbers by the

number of ESs added. For this example of adding two ESs,

by two; change 10 to 12, 11 to 13, and so on

wrapper.app.parameter.11=-i

wrapper.app.parameter.12="\Device\NPF_{5405257

5-E4CC-46A5-B626-9167DD4F9BE3}"

wrapper.app.parameter.13=-f

wrapper.app.parameter.14="udp src port 67"

Starting the Windows Service

You can start the Windows service manually, or you can reboot the Windows

server, which starts the service automatically.

To start the Windows service manually:

Windows server