HP ProCurve NAC 800 User Manual page 407

Group
listener
certificates
logging
Table 13-1. DHCP Plug-in Configuration File Values
4. The DHCP Plug-in is configured using config.xml that resides on the
Windows 2003
Server in C:\WINDOWS\SYSTEM32\DHCP\config.xml. Table 12 (in the
Users Guide) shows options used in config.xml.
Item
failopen
port
looprate
certfile
location
level
maxsize
The following text shows a DHCP plug-in example configuration file with
default values:
<?xml version="1.0" encoding="utf-8" ?>
<dhcpconnector>
Description
failopen="true" means that if the NAC 800 DHCP
connection goes down, the DHCP server goes in to
all mode.
failopen="false" means that if the NAC 800 DHCP
connection goes down, the DHCP server goes in to
mode.
all
Specifies the port on which the Dynamic Link Library
(DLL) file should listen for NAC 800 connections.
The rate in seconds at which the DHCP server will check
for a broken connection.
A Privacy Enhanced Mail (PEM) formatted file
containing the server key and certificate along with any
CA trusted entities.
The location to save the DLL's log file. The log file is an
ASCII file.
The level of verbosity in the log.
1 - Errors only (logs unexpected behavior, such as
to parse configuration file )
2 - Errors and warnings (logs mode changes, such as
Connection to NAC 800 or Entering allow all mode
3 - Errors, warnings, and information messages (logs
major processing steps, such as
4 - Errors, warnings, information, and debug messages
The size in kB at which the log file should be rotated.
When the maximum size specified is exceeded the
current log file is closed and renamed as
.
name> . <integer>
NOTE: If the current log file is open for reading, Windows
cannot rename the file. In that case, the DLL is unable to
rotate the log file, and attempts to re-open the current
log file and continue logging to it.
DHCP Plug-in
Installation Overview
allow
deny
unable
No
)
)
clearing ACL
<current file
13-5